|
|
|
|
|
|
|
|
|
|
|
|
|
|
Slotted holes for universal use. Packed with installation screws.
|
Slotted holes for universal use. Packed with installation screws.
|
Stanley Hardware Strike Plate, Steel, Zinc, Suitable for: 1/4, 3/8 and 1/2 in Strikes, Includes: (2) Shims
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The spring is perfect to use on screen or storm doors for positive closing action. It has a steel construction with zinc finish.
|
Designed for doors and lightweight gates. Looped ends for installation. Does not include hooks. Boxed, zinc-plated finish.
|
N 6559 is a set of handed white plastic guides that have a spring-loaded insert tip that fits bottom grooved tracks. They mount into the back bottom frame section of steel panel style doors & are held in place by a screw. Used on Glide-All door systems.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for doors and lightweight gates. Looped ends for installation. Does not include hooks. Boxed, zinc-plated finish.
|
This high density polyethylene roller assembly was used on HiLite doors. It is a high density polyethylene bracket with a spring loaded 9/16 in Dia flat edged high density polyethylene roller inside. It fits into a rectangle slot in the bottom of the door and is held in by the included screw.
|
The spring is perfect to use on screen or storm doors for positive closing action. It has a steel construction with zinc finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The spring is perfect to use on screen or storm doors for positive closing action. It has a steel construction with zinc finish.
|
Designed for doors and lightweight gates. Looped ends for installation. Does not include hooks. Boxed, zinc-plated finish.
|
The spring is perfect to use on screen or storm doors for positive closing action. It has a steel construction with zinc finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy steel with extruded bearing in housing and rocker arm - assures smooth action. Includes screw.
|
This sliding screen door handle and latch is non-handed and used on 1/2 in extruded and roll-formed doors. The handle has 3 in mounting holes. The steel latch is 2-13/16 in long with a 1/2 in projection and slides up and down to engage the keeper A 148 or A 162. It is used by aluminite as well as other patio door manufacturers.
|
This insert style sliding screen door assembly has a high density polyethylene housing with a high density polyethylene roller insert. It is used on the Academy Uni-Fit screen doors. The roller is a 1 in high density polyethylene roller and is used on the top or the bottom. Easy to install by inserting into the open U shaped frame and inserting the screw.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
die-cast & steel rod. Visual pack.
|
die-cast & steel rod. Visual pack.
|
die-cast & steel rod. Visual pack.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Looped ends for easy installation. Four diameter sizes for various applications. Designed for doors and lightweight gates. Steel wire spring. Visual pack.
|
Looped ends for easy installation. Four diameter sizes for various applications. Designed for doors and lightweight gates. Steel wire spring. Visual pack.
|
Wright Products storm door chain is recommended for all screen or storm doors. This chain helps prevent both door and closer damage due to wind gusts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This sliding screen door handle and latch is used on Anjac as well as other patio door manufacturers. It is non-handed and used on 1/2 in Thick x 1-5/8 in W screen door frame. The nylon latch hook is 3/16 in long fits into a slot or mortise on the edge of the screen door. It has 3-3/4 in mounting holes and can be opened from both sides. There is a night lock on the inside. The nylon latch rotates to engage or disengage the A 125.
|
This Arcadia style roller assembly was used by Arcadia doors as well as many other patio door manufacturers. This is also currently a very popular design amongst patio door manufacturers in today's market place. It has a wire tension spring and comes with a 1 in high density polyethylene roller and fits onto the B 569 corner insert. It is often used on the top as well as the bottom of the sliding screen door.
|
This rocker style spring tension roller assembly is used on International doors. It was used on International Series 900, 925, 950 and newer. The body is stamped aluminum with a tension spring attached. It has a 1 in high density polyethylene center grooved roller.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Length adjusts from 13 to 17 in.
|
This roller assembly with M shaped tension spring with a 1 in high density polyethylene ball bearing roller is used by several patio door manufacturers. The heat-treated tension spring is 2-5/16 in L and shaped like an M giving it the tension needed by the screen door to slide properly.
|
This sliding screen door top roller guide was used on HiLite Doors. The high density polyethylene body installs into the top of the screen door frame and is held in place by the included screw. The guide roller is a 11/16 in oval ball bearing high density polyethylene roller.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Prime-Line Flexible Universal Bug Strip, Vinyl, Black, 84 in L, 1-3/8 in W
|
Designed to absorb shock, preventing wind damage to screen and storm doors and closers. Visual pack.
|
N 6830 is an adjustable, side mounted, top hung closet door roller assembly with a 7/16 in offset and a 15/16 in convex nylon roller used on Excellent brand closet doors. It fits 3/4 in to 1-3/8 in thick doors. Originally used by Excellent Door.
|
|
|
