|
|
|
|
|
|
Simpson Strong-Tie Outdoor Accents Avant APVST412 Flat Strap, 11-1/4 in L, 3 in W, Steel, ZMAX
|
|
|
The Outdoor Accents decorative hardware product line features connectors and fasteners that bring beauty and strength to custom outdoor living structures. The APVST flat strap works for lumber in both nominal and rough sizes. It can be used to connect two beams together or added to any project as a decorative accent. Part of the Avant Collection.
|
|
|
|
|
|
|
|
|
|
Simpson Strong-Tie STHD STHD14 Strap Tie Holdown, 26-1/8 in L, 3 in W, Steel, Galvanized
|
|
|
The STHD is an embedded strap-tie holdown offering high-loads in both wood and cold-formed steel construction. When installed on the forms with the StrapMate? strap holder or other holding device, the unique design of this cast-in-place strap-tie holdown delivers enhanced stability before and during the pour to help prevent both parallel and perpendicular movement. This results in accurate positioning of the strap and reduced possibility of spalling.
|
|
|
|
|
|
|
|
|
|
STRAP TIE LIGHT GALV 1-1/4X9IN - Case of 50
|
|
|
The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members.
|
|
|
|
|
|
|
|
|
|
STRAP TIE LT GALV 1-1/4 X 12IN - Case of 50
|
|
|
The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members.
|
|
|
|
|
|
|
|
|
|
T-STRAP GALV 14GA 6 X 6IN - Case of 10
|
|
|
The T is designed for beam-to-column applications. This versatile utility strap is T-shaped, making it ideal for transferring tension loads in a variety of applications. The T features well-placed fastener holes and can easily be installed with nails or bolts.
|
|
|
|
|
|
|
|
|
|
L-STRAP GALV 14GA 6 X 6IN - Case of 10
|
|
|
The L is designed for beam-to-column applications. This versatile utility strap is L-shaped, making it ideal for transferring tension loads in a variety of applications. The L features well-placed fastener holes and can easily be installed with nails or bolts.
|
|
|
|
|
|
|
|
|
|
STRAP TIE LT GALV 1-1/4 X 18IN - Case of 50
|
|
|
The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members.
|
|
|
|
|
|
|
|
|
|
STRAP TIE MED GALV 12GA 27IN - Case of 10
|
|
|
The MST is designed to resist tension loads in floor-to-floor and other applications. This high-capacity strap features a dense nailing pattern and can be installed with either nails or bolts. The MST is a load-rated, precut strap designed for quick installation and optimal performance. It is suitable for connecting double 2X members or greater.
|
|
|
|
|
|
|
|
|
|
STRAP TIE HVYD GALV 12GA 12IN - Case of 25
|
|
|
The HRS is designed to resist tension forces between two wood members. The HRS6, HRS8 and HRS12 can be installed on the edge of 2X members. These straps are load-rated, precut straps designed for quick installation and optimal performance. The HRS installs where top or bottom plates are cut, at wall intersections and as ridge ties.
|
|
|
|
|
|
|
|
|
|
L-STRAP GALV 14GA 8 X 8IN - Case of 10
|
|
|
The L is designed for beam-to-column applications. This versatile utility strap is L-shaped, making it ideal for transferring tension loads in a variety of applications. The L features well-placed fastener holes and can easily be installed with nails or bolts.
|
|
|
|
ENAMELWARE
