|
|
|
|
|
|
|
|
|
|
|
|
|
|
Type L pellent vent storm collar used at the top of the flashing to assist in shedding water from the assembly.
|
DuraVent Wall Strap, Specifications: 1 in Clearance, Dimensions: 3-5/8 in Dia x 2 in W, Suitable for: 3 in Pipe
|
Selkirk Exterior Shield, Black, Dimensions: 4 in Dia x 12-1/2 in L x 12-1/2 in W, Wall Mounting
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features fully unitized, twist-lock construction in 3 in Dia and 4 in Dia. Listed at 1 in clearance to combustibles. It can be used in both vertical and horizontal installations. Stainless steel wall combined with a galvanized outer wall. Pipe OD is diameter plus 5/8 in. Galvalume or painted black outer finish.
|
Selkirk Trim Plate, Black, Dimensions: 3 in Dia
|
Selkirk Trim Plate, Stainless Steel, Black, Dimensions: 4 in ID x 12-1/2 in L x 12-1/2 in W
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use on the exterior to support pipe to wall. Use only with Selkirk pellet stove pipe. Hold pipe 3 in from wall. UL listed.
|
DuraVent PelletVent Straight Pipe, 3 in Dia, 6 in L, 0.012/0.018 in Thick, Stainless Steel, Suitable for: PelletVent Multi-Fuel Venting System
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Selkirk Tall Cone Pipe Flashing, Pipe Size: 4 in, 15-1/2 in OAL, 12 in OAH
|
|
Features fully unitized, twist-lock construction in 3 in and 4 in Dia. Listed at 1 in clearance to combustibles. It can be used in both vertical and horizontal installations. Stainless steel wall combined with a galvanized outer wall. Pipe OD is diameter plus 5/8 in. Galvalume or painted black outer finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Selkirk Pellet Vent Pipe Increaser, 3 x 4 in Connection, Stainless Steel, Galvanized, Installation Type: Horizontal, Vertical
|
DuraVent Pellet Vent Stove Pipe, 4 in Dia, 12 in L, 0.012/0.018 in Thick, Galvanized Outer/Stainless Steel Inner, Suitable for: PelletVent Multi-Fuel Venting System
|
DuraVent Wall Strap, Pipe Size: 4 in, 4-5/8 in Dia
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Vertical round top/termination cap. Type L pellet vent. Cap provides necessary protection of the vent system from rain and other elements. UL listed.
|
|
Type L pellet vent. Flashings are used for keeping water and other debris from entering between the pipe and roof. Adjustable pitch. UL Listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adjustable pipe connector will connect to 3 in appliance outlet and is securely fastened with a hose clamp, while the male end adapts to the standard inlet end of 3 in VP pipe, elbow or tee. UL listed.
|
DuraVent DuraPlus 2443297 Series Wall Strap, Specifications: 6 in Size, Steel, Galvanized, Dimensions: 16 in L x 2 in THK, Suitable for: DuraPlus All Fuel Chimney
|
DuraVent PelletVent Adjustable Straight Pipe, 3 in Dia, 12 in L, 0.012/0.018 in Thick, Stainless Steel, Suitable for: PelletVent Multi-Fuel Venting System
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DuraVent PelletVent Appliance Adapter/Increaser, Nominal Size: 3 x 4 in, Stainless Steel, Galvalume, Dimensions: 4 in H
|
DuraVent DVL Series Adapter, Nominal Size: 6 in, Stainless Steel, Galvanized, Black, 7 in Dia, 5 in L
|
Patent pending venting system designed for stoves that burn multi-fuels or oil fuel. Multi-fuels include wood pellets, corn, cherry pits, switch grass, coffee husks, walnut shells, soybeans, wheat, sunflower hulls, rapeseed and sugar beets. All PelletVent components that come into contact with flue gases are built with an inner wall of corrosion-resistant super ferritic metal. PelletVent is uncompromised in attention to detail and performance. Seams are factory-sealed on all elbows, tees and fittings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DuraVent Pellet Vent Stove Pipe, 4 in Dia, 24 in L, 18 ga Thick, Galvanized Outer/Stainless Steel Inner, Suitable for: PelletVent Multi-Fuel Venting System
|
DuraVent Adjustable Pellet Vent Pipe, 4 in Dia, 12 in L, 0.012/0.018 in Thick, Stainless Steel, Suitable for: PelletVent Multi-Fuel Venting System, Includes: 1/4 in Screw
|
DuraVent PelletVent Square Horizontal Cap, 3 in, Galvalume Steel Outer/430 Stainless Steel Inner, 8-1/4 in Dia, 8 in L
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features fully unitized, twist-lock construction in 3 in Dia and 4 in Dia. Listed at 1 in clearance to combustibles. It can be used in both vertical and horizontal installations. Stainless steel wall combined with a galvanized outer wall. Pipe OD is diameter plus 5/8 in. Galvalume or painted black outer finish.
|
patent pending venting system designed for stoves that burn multi-fuels or oil fuel. Multi-fuels include wood pellets, corn, cherry pits, switch grass, coffee husks, walnut shells, soybeans, wheat, sunflower hulls, rapeseed and sugar beets. All PelletVent components that come into contact with flue gases are built with an inner wall of corrosion-resistant super ferritic metal. PelletVent is uncompromised in attention to detail and performance. Seams are factory-sealed on all elbows, tees and fittings.
|
patent pending venting system designed for stoves that burn multi-fuels or oil fuel. Multi-fuels include wood pellets, corn, cherry pits, switch grass, coffee husks, walnut shells, soybeans, wheat, sunflower hulls, rapeseed and sugar beets. All PelletVent components that come into contact with flue gases are built with an inner wall of corrosion-resistant super ferritic metal. PelletVent is uncompromised in attention to detail and performance. Seams are factory-sealed on all elbows, tees and fittings.
|
|
|
