|
|
|
|
|
|
|
|
|
|
|
|
|
|
can be inverted for self-adjusting application, used on rolled edge and other center mounted tracks.
|
Side saddles help to center drawer and restore smooth operation of track mounted drawers. Includes 10 side saddles and 20 fasteners.
|
Used to hold track to back of cabinet, fits most popular side-mount rails. Contains two backplates, two sets of installation screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 in square cavity allows self-alignment of center mounted drawer tracks. 1-13/16 in hole spacing. Includes installation screws. Raw finish.
|
Brown polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 1/4 in x 7/8 in track. Contains two guides, four side saddles and two sets of installation fasteners.
|
Red polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32 x 3/4 in track. Contains 2 guides, 4 side saddles and 2 sets of installation fasteners.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32 in x 1-1/8 in track.
|
Purple polyethylene guide and white side saddles. Guides used for aligning drawer and making for a smoother operation. Fits a 3/32 x 1-3/16 in track. Contains 2 guides, 4 side saddles and 2 sets of installation fasteners. Designed for use with metal rolled edge tracks.
|
Polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32 in x 1-1/8 in track.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Yellow polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 3/32 in x 1-9/32 in track. Contains two guides, four side saddles and two sets of installation fasteners.
|
Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains two roller assemblies, two sets of installation screws.
|
Rollers mount at the front of the drawer opening and help center the drawer. This allows for smoother operation. Flat stepped roller edge type, mixed materials. Includes 1 left hand roller, 1 right hand roller and 1 set of installation fasteners.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains two roller assemblies, two sets of installation screws.
|
Optional rear mounting socket for face frame application simplifies installation. Non-handed. Hardware included. 3-1/2 in L x 1/2 in W. Zinc finish.
|
White nylon, 2-3/4 in socket depth allows 2 in of front to back adjustment of the rail, used on side mounted drawer track systems. Raw finish. Contains one left hand bracket, one right hand bracket, two sets of installation screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains two roller assemblies, two sets of installation screws.
|
Pair of rear brackets (left and right) for the 1805 epoxy-coated drawer slide features a 2-3/8 in socket.
|
Optional rear mounting socket for face frame application simplifies installation. Non-handed. Hardware included. 3-1/2 in L x 1/2 in W. Zinc finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used on furniture drawer systems, for dressers, hutches and night stand drawers. Opening for metal track on larger piece measures 15/16 in x 3/32 in. Kit includes 2 dark-brown, plastic track case guides and 2 track guides, 4 white, plastic corner glides, 8 ring shank nails for nailing in corner glides (3/4 in x 14-1/2 ga.) and 8 Phillips drive, pan head screws for installation of guides (#6 x 5/8 in).
|
Galvanized steel track, rear support bracket with nylon rollers. 75 lb. test rated, requires 1-1/4 in clearance for installation. Track may be cut down for shorter drawer and can be used for top or bottom mount installations. Monorail design. Contains 1 track, 1 roller guide, 1 rear mount bracket, 1 left-hand roller, 1 right hand roller, 1 set of installation fasteners.
|
rolled edge galvanized steel track with polyethylene guides and nylon front rollers. Track may be cut down for shorter drawer and can be used for top or bottom mount installations. Contains 1 track, 1 front plate, 1 back plate, 1 drawer guide, 2 front rollers, 1 set of installation fasteners.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32 mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four-way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4 in. Required clearance, side of 1/2 in plus 1/32 in minus 0 each side. Top of 1 in required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18 in.
|
Light-duty slide designed for general drawer applications. Mounts with staples or screws. Height of 1 in. Required Clearance:1/8 in each side, 1-1/2 in from rear of drawer to cabinet, drawer to be 3/8 in shallower than opening. High-density polyethylene rollers. Drawers lift out for easy removal. Packaged with screws and installation instructions.
|
Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32 mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four-way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4 in. Required clearance, side of 1/2 in plus 1/32 in minus 0 each side. Top of 1 in required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32 mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4 in. Required clearance, side of 1/2 in plus 1/32 in minus 0 each side. Top of 1 in required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18 in.
|
Complete kit designed to replace most wood track systems. May be used for top or bottom mount installations. Restores smooth operation to track mounted drawers. Track may be cut down to fit shorter drawer applications. Complete kit designed to replace.
|
Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32 mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4 in. Required clearance, side of 1/2 in plus 1/32 in minus 0 each side. Top of 1 in required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32 mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4 in. Required clearance, side of 1/2 in plus 1/32 in minus 0 each side. Top of 1 in required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18 in.
|
Direct access mounting holes, precision ball bearings, telescopic action, non-handed design and lever disconnect. Includes screws for installation. Height of 1-1/8 in. Clearance required is 1/2 in plus 1/32 in minus 0 each side. Maximum drawer width 24 in.
|
Direct access mounting holes, precision ball bearings, telescopic action, non-handed design and lever disconnect. Includes screws for installation. Height of 1-1/8 in. Clearance required is 1/2 in plus 1/32 in minus 0 each side. Maximum drawer width 24 in.
|
|
|
