|
|
|
|
|
|
Prime-Line N 6559 Door Guide, Plastic, White, 2/PK
|
|
|
N 6559 is a set of handed white plastic guides that have a spring-loaded insert tip that fits bottom grooved tracks. They mount into the back bottom frame section of steel panel style doors & are held in place by a screw. Used on Glide-All door systems.
|
|
|
|
|
|
|
|
|
|
Prime-Line B 544 Edge Roller Assembly, 9/16 in Dia Roller, 1/4 in W Roller, Polyethylene Roller, Flat Roller, 5/8 in W
|
|
|
This high density polyethylene roller assembly was used on HiLite doors. It is a high density polyethylene bracket with a spring loaded 9/16 in Dia flat edged high density polyethylene roller inside. It fits into a rectangle slot in the bottom of the door and is held in by the included screw.
|
|
|
|
|
|
|
|
|
|
Prime-Line B 541 Spring Tension Roller Assembly, 1 in Dia Roller, 1/4 in W Roller, Polyethylene Roller, Concave Roller
|
|
|
This Arcadia style roller assembly was used by Arcadia doors as well as many other patio door manufacturers. This is also currently a very popular design amongst patio door manufacturers in today's market place. It has a wire tension spring and comes with a 1 in high density polyethylene roller and fits onto the B 569 corner insert. It is often used on the top as well as the bottom of the sliding screen door.
|
|
|
|
|
|
|
|
|
|
Prime-Line B 634 Center Grooved Roller Assembly, 1 in Dia Roller, 1/4 in W Roller, Polyethylene Roller, Concave Roller
|
|
|
This rocker style spring tension roller assembly is used on International doors. It was used on International Series 900, 925, 950 and newer. The body is stamped aluminum with a tension spring attached. It has a 1 in high density polyethylene center grooved roller.
|
|
|
|
|
|
|
|
|
|
Prime-Line B 529 Roller Assembly, 1 in Dia Roller, 1/4 in W Roller, Polyethylene Roller, Concave Roller, 3/8 in W
|
|
|
This insert style sliding screen door assembly has a high density polyethylene housing with a high density polyethylene roller insert. It is used on the Academy Uni-Fit screen doors. The roller is a 1 in high density polyethylene roller and is used on the top or the bottom. Easy to install by inserting into the open U shaped frame and inserting the screw.
|
|
|
|
|
|
|
|
|
|
Prime-Line B 640 Adjustable Spring Tension Roller Assembly, 1 in Dia Roller, 1/4 in W Roller, Polyethylene Roller, Steel
|
|
|
This roller assembly with M shaped tension spring with a 1 in high density polyethylene ball bearing roller is used by several patio door manufacturers. The heat-treated tension spring is 2-5/16 in L and shaped like an M giving it the tension needed by the screen door to slide properly.
|
|
|
|
|
|
|
|
|
|
Prime-Line N 6830 Door Roller, 15/16 in Dia Roller, 1/4 in W Roller, Steel, 2-Roller
|
|
|
N 6830 is an adjustable, side mounted, top hung closet door roller assembly with a 7/16 in offset and a 15/16 in convex nylon roller used on Excellent brand closet doors. It fits 3/4 in to 1-3/8 in thick doors. Originally used by Excellent Door.
|
|
|
|
|
|
|
|
|
|
Prime-Line B 543 Roller Assembly, 11/16 in Dia Roller, Polyethylene Roller, Convex Roller, 5/8 in W, 2-3/8 in H, Nylon
|
|
|
This sliding screen door top roller guide was used on HiLite Doors. The high density polyethylene body installs into the top of the screen door frame and is held in place by the included screw. The guide roller is a 11/16 in oval ball bearing high density polyethylene roller.
|
|
|
|
|
|
|
|
|
|
Prime-Line B 704 Flat Spring Tension Roller Assembly, 1 in Dia Roller, 1/4 in W Roller, Steel Roller, Concave Roller
|
|
|
This high tension steel spring roller assembly fits onto the Columbia Uni-Fit Series door. This roller assembly has a 1 in steel ball bearing roller mounted in the housing. The end of the flat steel spring inserts into a slot within the screen door frame while the flat tabs extending in front of the roller restrict the roller from retracting too far into the door frame as it rolls.
|
|
|
|
|
|
|
|
|
|
Prime-Line B 537 Roller Assembly, 1 in Dia Roller, 1/4 in W Roller, Steel Roller, Concave Roller, 1-1/2 in W, 2 in H
|
|
|
This top hung roller assembly is used on Fullview doors as well as other patio door manufacturer's doors. The bracket is a flat stamped steel bracket with slotted mounting holes that allow it to be adjusted o the correct height when re-installing the screen door onto the upper track. The roller is a 1 in steel ball bearing center grooved roller.
|
|
|
|
ENAMELWARE
