|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment.
|
Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out-of-the-wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment.
|
Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The polypropylene range of inch-size push-in fittings is offered for tube sizes 1/4 to 1/2 in OD. The fittings are manufactured in white polypropylene with food-grade EPDM O-ring. They have been developed to satisfy the filtered pure water market and wide range of applications.
|
Need to make a change to an installed SharkBite? fitting or remove it. Disassembly is fast and easy using the disconnect clip. This product is available in a variety of sizes ranging from 1/4 to 1 in.
|
The ProBite disconnect tool is used for quick and easy fitting removal in all plumbing applications. The ProBite? disconnect tool is available in all standard fitting sizes to ensure a quick and proper fitting removal every time.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment.
|
Need to make a change to an installed SharkBite? fitting or remove it. Disassembly is fast and easy using the disconnect clip. This product is available in a variety of sizes ranging from 1/4 to 1 in.
|
Need to make a change to an installed SharkBite? fitting or remove it. Disassembly is fast and easy using the disconnect clip. This product is available in a variety of sizes ranging from 1/4 to 1 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Need to make a change to an installed SharkBite? fitting or remove it. Disassembly is fast and easy using the disconnect clip. This product is available in a variety of sizes ranging from 1/4 to 1 in.
|
Need to make a change to an installed SharkBite? fitting or remove it. Disassembly is fast and easy using the disconnect clip. This product is available in a variety of sizes ranging from 1/4 to 1 in.
|
Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out-of-the-wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment.
|
The ProBite disconnect tool is used for quick and easy fitting removal in all plumbing applications. The ProBite disconnect tool is available in all standard fitting sizes to ensure a quick and proper fitting removal every time.
|
Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out-of-the-wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment.
|
The polypropylene range of inch-size push-in fittings is offered for tube sizes 1/4 to 1/2 in OD. The fittings are manufactured in white polypropylene with food-grade EPDM O-ring. They have been developed to satisfy the filtered pure water market and wide range of applications.
|
The polypropylene range of inch-size push-in fittings is offered for tube sizes 1/4 to 1/2 in OD. The fittings are manufactured in white polypropylene with food-grade EPDM O-ring. They have been developed to satisfy the filtered pure water market and wide range of applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Need to make a change to an installed SharkBite? PVC fitting or remove it. Disassembly is fast and easy using the PVC depth gauge and disconnect clip. This product also indicates how deep the PVC pipe needs to be inserted into a SharkBite? PVC fitting in order to form a watertight seal. This product is available in a variety of sizes ranging from 1/2 to 1 in.
|
Need to make a change to an installed SharkBite? PVC fitting or remove it. Disassembly is fast and easy using the PVC depth gauge and disconnect clip. This product also indicates how deep the PVC pipe needs to be inserted into a SharkBite? PVC fitting in order to form a watertight seal. This product is available in a variety of sizes ranging from 1/2 to 1 in.
|
Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment.
|
Need to make a change to an installed SharkBite? PVC fitting or remove it. Disassembly is fast and easy using the PVC depth gauge and disconnect clip. This product also indicates how deep the PVC pipe needs to be inserted into a SharkBite? PVC fitting in order to form a watertight seal. This product is available in a variety of sizes ranging from 1/2 to 1 in.
|
Push-fit fitting for the connection of plastic, copper and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. A must for any tool bag. The unique feature of the Speedfit concept, the ability to disconnect the fitting at will, means that the end cap provides a leak-proof seal and can be removed at any stage in order to allow work to restart or allow an extension to the system. This makes the fitting the ideal tool for when water needs to be turned back on, overnight for instance or if a job suffers an interruption. End caps are also useful when pressure testing a system before appliances are connected. Simply push the fitting fully on to the pipe. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment. Size indicated is end x end x branch.
|
ProBite's lead-free push connect? stop end connectors are easy to install and easy to remove. Using Push Connect? technology, our stop ends can be installed in seconds without the use of glues, calks and special plumbing tools. Great for pressure testing, central heating systems or any application where the flow of water might need to be interrupted. ProBite's lead-free push connect? stop ends are great for direct or indirect cold water systems, unvented and vented hot water systems and more.
|
John Guest Pipe Connector, Nominal Size: 3/4 in, CTS Connection, 160 psi, Operating Temperature: 200 deg F, Plastic, Suitable for: CPVC, Copper and PEX Pipe
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The coupler is a push-fit plastic fitting for the connection of plastic, copper and CPVC pipe. It was designed, manufactured and assembled by John Guest Speedfit. It can be installed by simply pushing the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The coupler fitting ensures an easier working environment in confined places, is approved for behind the wall installations and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods.
|
The speed-fit secure range of fittings including the male connector ensures a secure connection when adapting Speedfit pipe or copper to threaded applications. To install, always use PTFE tape when preparing thread, working up the full thread length. The fitting can be tightened using a spanner on the hexagon area at the middle of the component.
|
SharkBite EvoPEX fittings are for use in hot and cold domestic water systems, as well as radiant heating/cooling systems. SharkBite EvoPEX fittings are intended to be installed with SharkBite PEX pipe as a holistic system.
|
|
|
