Home > HEATING & COOLING > HEAT & AIR CONDITIONING > DUCT WORK
Sort By:
1
Imperial GV0752 Round Damper With Duct Key Lambro 304 Flexible Duct Pipe, 5 in x 8 ft, Compression, Aluminum Lambro 306 Flexible Duct Pipe, 6 in x 8 ft, Compression, Aluminum
Use to adjust and balance airflow in individual runs of round pipe. Semi-rigid flexible duct. Without clamps. Semi-rigid flexible duct. Without clamps.
Lambro 143W Dryer Ventilator Lambro 308 Flexible Duct Pipe, 7 in x 8 ft, Compression, Aluminum Imperial GV0704-C Standard Straight Back Wall Register Boot
Under eave vent for bathroom fan and dryer venting. Semi-rigid flexible duct. Without clamps. Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga.
Imperial GV0667-C Center Wall Register Boot Imperial GV2450 Straight Back Wall Register Boot BOOT REGISTER UNVSL 4X12X6 GLV
Imperial Wall Register Boot, Angle: 90 deg, Material Gauge: 30 ga, Steel, Galvanized, 13.319 in L, 10 in W, 8.266 in H Imperial Wall Register Boot, Steel, Galvanized, 3 in L, 10 in W, S-Cleat Mounting Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga.
BOOT REGISTER UNIV 3.25X10X6IN Frost King SP55/6 Foil Fiberglass Wrap 15 ft L x 2 in T Imperial GV0626-C Wall Register Boot
Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga. Combines the properties of two popular insulating materials in one handy roll. It can be used on both heating and air-conditioning ducts, as well as on car and truck hoods and trunks. Used for right angle transition from round pipe or insulated flexible duct to a register or grille.
Imperial GV0699-C Standard Straight Back Wall Register Boot BOOT REGISTER ANGLE 2.25X12X 6 BOOT REGISTER ANGLE 4X12X6 GLV
Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga. Used for right-angle transition from round pipe or insulated flexible duct to a register or grille. Used for right angle transition from round pipe or insulated flexible duct to a register or grille.
Imperial GV0945-C Adjustable Round Duct Take Off Imperial GV0060-C Short Way Wall Stack Elbow INSULATON DUCT 12INX1/8INX15FT
Used for transition from rectangular duct to round pipe or insulated flexible duct. Adjustable from 0 to 90 deg (0.30 ga). Used to change the horizontal direction of two sections of rectangular stack duct. 30 ga. Combines the properties of two popular insulating materials in one handy roll. It can be used on both heating and air-conditioning ducts, as well as on car and truck hoods and trunks.
Imperial GV0213 Wall Stack
Used between wall studs for venting, heating and air conditioning supply and return duct.
   
 
1