|
|
|
|
|
|
B & K 105-223 Stop Valve, 1/2 in Connection, Solvent Weld, 100 psi Pressure, CPVC Body
|
|
|
CPVC construction. For use with hot or cold water. Rated for 100 psi at 180 deg F. Not for use with compressed air. Solvent connection for use with CPVC tubing size pipe. Solvent ends comply with ASTM 2846. Certified to NSF 61.
|
|
|
|
|
|
|
|
|
|
B & K 105-224 Stop Valve, 3/4 in Connection, Solvent Weld, 100 psi Pressure, CPVC Body
|
|
|
CPVC construction. For use with hot or cold water. Rated for 100 psi at 180 deg F. Not for use with compressed air. Solvent connection for use with CPVC tubing size pipe. Solvent ends comply with ASTM 2846. Certified to NSF 61.
|
|
|
|
|
|
|
|
|
|
John Guest PPSV040808WP Shut-Off Valve, 1/4 in Connection, Tube, 150 psi Pressure, Polypropylene Body
|
|
|
Produced in polypropylene and fitted with EPDM O-ring, more chemical-resistant than acetal. Use in potable water applications. Not to be used with compressed air, explosive gases, petroleum spirits and other fuels or for heating systems.
|
|
|
|
|
|
|
|
|
|
John Guest PPSV041212WP Shut-Off Valve, 3/8 in Connection, Tube, 150 psi Pressure, Polypropylene Body
|
|
|
Produced in polypropylene and fitted with EPDM O-ring, more chemical-resistant than acetal. Use in potable water applications. Not to be used with compressed air, explosive gases, petroleum spirits and other fuels or for heating systems.
|
|
|
|
|
|
|
|
|
|
Southland 105-503NL Stop Valve, 1/2 in Connection, Compression, 125 psi Pressure, Brass Body
|
|
|
Rising stem, 6-point cast iron handle, solder ends comply with ANSI B16.18, certified to NSF 61-G.
|
|
|
|
|
|
|
|
|
|
Flair-It 16880 Stop Valve, 1/2 in Connection, PEX, Plastic Body
|
|
|
For hot or cold water In-line valve with PEX connections on both ends. Bar coded.
|
|
|
|
|
|
|
|
|
|
Flair-It 16879 Stop Valve, 3/8 in Connection, PEX, Plastic Body
|
|
|
For hot or cold water In-line valve with PEX connections on both ends. Bar coded.
|
|
|
|
|
|
|
|
|
|
Southland 105-504NL Stop Valve, 3/4 in Connection, Compression, 125 psi Pressure, Brass Body
|
|
|
Rising stem, 6-point cast iron handle, solder ends comply with ANSI B16.18, certified to NSF 61-G.
|
|
|
|
|
|
|
|
|
|
Watts PL-3042 Stop Valve, 3/8 in Connection, Compression x MPT, 150 psi Pressure, Manual Actuator, CPVC Body
|
|
|
Plastic quick-connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
|
|
|
|
|
|
|
|
|
Watts PL-3012 Stop Valve, 1/4 in Connection, Compression x MPT, 150 psi Pressure, Manual Actuator, CPVC Body
|
|
|
Plastic quick-connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
|
|
|
ENAMELWARE
