Home > FASTENERS > CHAIN, CABLE, ROPE > CHAIN / ACCESSORIES
Sort By:
1 2 3 ... 20
Campbell T7665032 Welded Ring SHUT COLD ZINC PLATED 3/16IN National Hardware 3152BC Lap Link
Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 1-1/4 in ID, Chain Size: #7, Steel, Nickel-Plated Designed as a temporary chain link repair, use one size bigger than chain. Can be used to couple chain attachments. Do not reuse after closure. Manufactured from steel. National Hardware 3152BC Lap Link, Working Load Limit: 120 lb, Trade Size: 1/8 in, Steel, Zinc
National Hardware 3152BC Lap Link SPRING SNAP STEEL ZN 3/16 Campbell T7661152 Welded Ring
National Hardware 3152BC Lap Link, Working Load Limit: 225 lb, Trade Size: 3/16 in, Steel, Zinc Do not exceed the working load limit. Do not use for overhead lifting, to support human weight, for playground or athletic equipment or as safety device. Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 2 in ID, Chain Size: #3, Steel, Nickel-Plated
Campbell T7665042 Welded Ring Campbell T7660841 Welded Ring Campbell T4900424 Cold Shut
Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 1-1/2 in ID, Chain Size: #3, Steel, Nickel-Plated Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 1-1/4 in ID, Chain Size: #4, Steel, Zinc Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
Midland Big Orange 081163/MC645G Anchor Shackle Fehr Bros 1/4IN Anchor Shackle National Hardware 3152BC Lap Link
Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1. Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting. National Hardware 3152BC Lap Link, Working Load Limit: 500 lb, Trade Size: 1/4 in, Steel, Zinc
SHUT COLD ZN PLTD STEEL 1/4IN Cambell T9600535 Anchor Shackle Cambell T9600435 Anchor Shackle
Baron Cold Shut, Working Load Limit: 750 lb, Trade Size: 1/4 in, Steel, Zinc WARNING: Use shackles only as indicated. Shackles must be inspected for wear, distortion and damage before use. If the pin or bow is worn, distorted or damaged, discard the entire shackle and replace. DO NOT USE round pin shackles in rigging applications. Screw pin shackles should not be used if there will be movement on the pin. Movement could cause the pin to unscrew and drop the load. Always stand clear of loads being lifted. WARNING: Use shackles only as indicated. Shackles must be inspected for wear, distortion and damage before use. If the pin or bow is worn, distorted or damaged, discard the entire shackle and replace. DO NOT USE round pin shackles in rigging applications. Screw pin shackles should not be used if there will be movement on the pin. Movement could cause the pin to unscrew and drop the load. Always stand clear of loads being lifted.
Baron 2450-1/4 Snap Link SHUT COLD ZN PLTD STEEL 5/16IN Baron 1407 Open Eye Spring Snap
Do not exceed the working load limit. Do not use for overhead lifting, to support human weight, for playground or athletic equipment or as safety device. Baron Large Cold Shut, Working Load Limit: 1250 lb, Inside Length: 1-3/8 in, Wire Diameter: 5/16 in, Steel, Zinc-Plated, Silver Baron Chain Snap, Working Load Limit: 60 lb, Snap Opening Size: 9/32 in, Steel, Zinc, Dimensions: 3-3/8 in L
Campbell T4900524 Cold Shut BREACHING SNAP ZN 2-1/2 Cambell T9600635/T9640635 Anchor Shackle
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. Baron Bit Snap, Working Load Limit: 80 lb, Snap Opening Size: 5/16 in, Steel, Zinc, Dimensions: 2-1/2 in L WARNING: Use shackles only as indicated. Shackles must be inspected for wear, distortion and damage before use. If the pin or bow is worn, distorted or damaged, discard the entire shackle and replace. DO NOT USE round pin shackles in rigging applications. Screw pin shackles should not be used if there will be movement on the pin. Movement could cause the pin to unscrew and drop the load. Always stand clear of loads being lifted.
Campbell T7665001 Welded Ring Baron 193LR-1/4" Screw Pin Anchor Shackle National Hardware 3155BC Ring
Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 2 in ID, Chain Size: #7B, Steel, Nickel-Plated Baron Anchor Shackle, Working Load Limit: 0.5 ton, Trade Size: 1/4 in, Pin Type: Screw, Pin Diameter: 5/16 in, Steel, Galvanized National Hardware 3155BC Welded Ring, Working Load Limit: 195 lb, Ring Diameter: 1 in ID, Chain Size: #7, Steel, Zinc
SHACKLE ANCHOR SCRW PIN 3/16IN SNP LINK SPRG HK STL ZN 9/32IN SPRING SNAP RNDEYE SWVL 3/8
Baron Anchor Shackle, Working Load Limit: 0.3 ton, Trade Size: 3/16 in, Pin Type: Screw, Pin Diameter: 1/4 in, Steel, Hot-Dipped Galvanized Do not exceed the working load limit. Do not use for overhead lifting, to support human weight, for playground or athletic equipment or as safety device. Baron Spring Snap, Working Load Limit: 45 lb, Snap Opening Size: 3/8 in, Zinc, Nickel, Dimensions: 2-5/8 in L
Campbell T7661361 Welded Ring National Hardware 3153BC Cold Shut National Hardware 3116BC Bit Snap
Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 2-1/2 in ID, Chain Size: #2, Steel, Zinc National Hardware 3153BC Cold Shut, Working Load Limit: 1250 lb, Trade Size: 1/4 in, Steel, Zinc National Hardware 3116BC Bit Snap, Working Load Limit: 115 lb, Snap Opening Size: 5/16 in, Steel, Zinc, Dimensions: 1-3/4 in L
   
 
1 2 3 ... 20