|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used for secure connection to flexible aluminum duct.
|
These clamps are made up of zinc-plated steel and are ideal for the installation of most home and industrial dryers. Their unique design allows for easy-to-tighten convenience. Clamps can also be used on most bath fans and other applications.
|
These clamps are designed with an easy-to-use pressure mechanism for use in various applications. They are designed for use without any tools on non-rigid flexible ducts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Increases from 3 to 4 in and reduces from 4 to 3 in.
|
These clamps are made up of zinc-plated steel and are ideal for the installation of most home and industrial dryers. Their unique design allows for easy-to-tighten convenience. Clamps can also be used on most bath fans and other applications.
|
Lambro Adjustable Duct Elbow, Material Gauge: 26 ga, Aluminum, Dimensions: 4 in Dia x 8 in H
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Includes face only.
|
The Lambro 4 in aluminum splice connector is ideal for effectively connecting two sections of flexible foil, flexible insulated duct or rigid pipe together. The connector is crimped on both ends with a center bead to securely fasten the sections of duct to. The connector is constructed of 28 gauge aluminum and is suitable for use in most heating, venting and air conditioning applications.
|
For flexible aluminum duct.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Thicker and more durable. 4 in x 10-1/2 in Fully assembled, riveted tailpipe, backdraft flapper. Wide mouth for excellent airflow.
|
Lambro Vent Elbow, 3 in, 26 ga, Aluminum, For: Duct
|
Lambro Louvered Vent, Plastic, White, Installation Type: Wall, 4 in L, 4.64 in W, 1.51 in H, Includes: (12) Louvered Vents
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lambro Inline Damper, Suitable For Use With: Draft Blocker, 4 in
|
Ideal when all aluminum duct is required by code in some gas and electric dryer applications. Totally noncombustible with a maximum operating temperature of 435??F. The UL duct is thicker than the standard version.
|
Opening/closing flaps prevents outside elements from entering the vent. UV inhibitor is used to help prevent the premature fading of vent. (1) 4 White plastic louvered vent with 11 tail pipe, (1) 4 White plastic trim plate.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flexible aluminumaluminum foil LamaFlex duct is ideal for applications where building codes require use of all aluminum duct. The duct has a maximum operating temperature of 250 deg F.
|
Imperial Dryer Connector Elbow, 4 in
|
Opening/closing damper prevents outside elements from entering the vent. (1) 4 aluminum preferred hood vent with 11 tail pipe. (1) 4 white plastic trim plate.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Opening/closing flaps prevents outside elements from entering the vent. UV inhibitor is used to help prevent the premature fading of vent. (1) 4, white plastic louvered vent with 11 tail pipe, (1) 4 white plastic trim plate.
|
Plastic face with standard aluminum tailpiece.
|
Plastic face with standard aluminum tailpiece.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic face with standard aluminum tailpiece.
|
Kit for clothes dryer installations. Includes white plastic 90 deg elbow with rubber gasket inside one side and 4 in metal worm gear clamp.
|
Semi-rigid aluminum duct is ideal for applications where building codes require use of all aluminum duct. The duct is totally non-combustible with a maximum operating temperature of 400 deg F.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Includes hood only.
|
Durable through the wall hood. Fully assembled, riveted tailpipe, backdraft flapper. Standard mouth hood for good airflow.
|
Plastic face with standard aluminum tailpiece.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Aluminum film laminate.
|
Elbow turns 90 deg within 4 in. One male rotating snap-lock fitting, one female rotating snap-lock fitting. For 90 deg turns, especially on the dryer.
|
Flexible aluminumaluminum foil LamaFlex duct is ideal for applications where building codes require use of all aluminum duct. The duct has a maximum operating temperature of 250 deg F.
|
|
|
