|
|
|
|
|
|
|
|
|
|
|
|
|
|
For 1/4 in ID (3/8 in OD) corrugated tube. For gas clothes dryer connections. Tapped 1/8 in female pipe thread. Dimension of 5-1/2 in L x 3.8 in W x 0.6 in D.
|
Fitting for 5/8 in OD tube (brass). New style 15/16-16 thread. AGA design certified.
|
Two-pieces construction, nut and body. Use with copper, brass, aluminum or steel tubing. -65 to 250 deg F temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration and vacuum. UPC individually bagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
9/16 in to 24 fine thread flare end for space heaters. Bagged with flag tag.
|
BrassCraft's steel female gas fitting connects a gas connector to an appliance gas inlet or gas supply pipe or gas ball valve. These fittings are manufactured from steel for a seamless, durable design. The flared end of the fitting connects to the gas connector nut. The male end connects to the gas appliance inlet, gas ball valve or gas supply stub out. Fitting is used with 5/8 in OD (15/16-16 thread) gas connectors for appliances with moderate BTU demands such as s a 5 or 6 burner stove, furnace or boiler.
|
BrassCraft's steel female gas fitting adapts a gas connector nut to appliance gas inlet, gas ball valve outlet or to the gas supply pipe. These fittings are manufactured from solid bar stock for a seamless, durable design. The flared end of the fitting connects to the gas connector nut. The male end connects to the gas appliance inlet, gas ball valve or gas supply stub out. Fitting is used with 5/8 in OD (15/16-16 thread) gas connectors for appliances with larger BTU demands such as a 5 or 6 burner stove, furnace or boiler.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SharkBite Gas Connector, Nominal Size: 5/8 x 1/2 in, Flare x FIP Connection, Steel, Zinc, 1-1/2 in L
|
Cash Acme Gas Adapter, 1/2 x 1/2 in Nominal, Flare x FIP Connection, Steel, Zinc-Plated, 6.06 in Length
|
For 1/4 in ID (3/8 in OD) corrugated tube. Recommended for gas clothes dryer connections. Use with PlumbShop SL or RSL Series connectors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For 1/4 in ID (3/8 in OD) corrugated tube. Recommended for gas clothes dryer connections. Use with SL or RSL Series connectors. Tapped 3/8 in female pipe thread.
|
For corrugated tube. Recommended for gas range connections.
|
This fine thread flare female adaptor has 9/16-24 thread. Rough brass finish. BRASS CRAFT Half Union female adapter. 38 in OD TUBE x 12 in FIP. for use with F0-6 916-24.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cash Acme Gas Adapter, 3/8 x 3/8 in Nominal, Flare x MIP Connection, Steel, Zinc-Plated, 6.06 in Length
|
Cash Acme Gas Connector, 5/8 x 1/2 in Nominal, Flare x MIP Connection, Steel, Zinc-Plated, 6.06 in Length
|
Cash Acme Gas Adapter, 1/2 x 1/2 in Nominal, Flare x MIP Connection, Steel, Zinc-Plated, 6.06 in Length
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For corrugated tube. Recommended for gas range connections.
|
Cash Acme Gas Connector, 5/8 x 3/4 in Nominal, Flare x MIP Connection, Steel, Zinc-Plated, 6.06 in Length
|
15/16-16 thread for brass range connectors. UPC individually bagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For 1/2 in ID (5/8 in OD) corrugated. Recommended for gas range connectors. Use with PlumbShop SC or RSC Series connectors. 1/2 in MIP end tapped 3/8 in FIP thread, 3/4 in MIP tapped 1/2 in FIP.
|
For 3/8 in ID (1/2 in OD) corrugated tube. Recommended for forced air heaters, gas ranges, furnaces and water heater connections. Use with PlumbShop SD or RSD Series connectors.
|
Two-pieces construction, nut and body. Use with copper, brass, aluminum or steel tubing. -65 to 250 deg F temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration and vacuum. UPC individually bagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For 1/2 in ID (5/8 in OD) corrugated. Recommended for gas range connectors. Use with PlumbShop SC or RSC Series connectors. 1/2 in MIP end tapped 3/8 in FIP thread, 3/4 in MIP tapped 1/2 in FIP.
|
For 3/8 in ID (1/2 in OD) corrugated tube. Recommended for fixed air heater, gas range, furnace and water heater connections. Used with PlumbShop SD or RSD Series connectors. Tapped 3/8 in FIP thread.
|
Two-pieces construction, nut and body. Use with copper, brass, aluminum or steel tubing. -65 to 250 deg F temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration and vacuum. UPC individually bagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
15/16-16 thread for brass range connectors. UPC individually bagged.
|
|
|
