|
|
|
|
|
Frost King 5P10XB6 Pipe Insulation, 5/8 in Dia, 6 ft L, Foam, 1/2 in Copper, 1/4 in Iron Pipe Pipe
|
|
Frost King Pipe Insulation, 5/8 in Dia, 6 ft L, 1/2 in Thick, Foam, Pipe Size: 1/2 in Copper, 1/4 in Iron Pipe
|
|
|
|
|
|
|
|
Frost King 5P11XB6 Pipe Insulation, 7/8 in Dia, 6 ft L, Foam, Gray, 3/4 in Copper, 1/4 in Iron Pipe Pipe
|
|
Frost King Pipe Insulation, 7/8 in Dia, 6 ft L, 1/2 in Thick, Foam, Gray, Pipe Size: 3/4 in Copper, 1/4 in Iron Pipe
|
|
|
|
|
|
|
|
Frost King 5P10X Tubular Pipe Insulation, 1/2 in Dia, 3 ft L, Polyethylene Foam, Black, 1/4, 1/2 in Pipe
|
|
Frost King Tubular Pipe Insulation, 1/2 in Dia, 3 ft L, 5/8 in Thick, Polyethylene Foam, Black, Pipe Size: 1/4, 1/2 in, Suitable for: Copper Pipe/Iron Pipe
|
|
|
|
|
|
|
|
Frost King 5P11X Tubular Insulation Pipe, 3 ft L, Foam, 7/8 in Pipe
|
|
Frost King Tubular Insulation Pipe, 3 ft L, Foam, Pipe Size: 7/8 in
|
|
|
|
|
|
|
|
PIPE INSULATION FOAM 1-1/4CX5 - Case of 24
|
|
Closed cell polyethylene foam. More thermally efficient. Cuts heat loss and stops pipe sweating. Helps stop freeze-ups. Contains flame retardants. Cut with scissors.
|
|
|
|
|
|
|
|
PIPE INSULATION FOAM 1CX5 - Case of 30
|
|
Closed cell polyethylene foam. More thermally efficient. Cuts heat loss and stops pipe sweating. Helps stop freeze-ups. Contains flame retardants. Cut with scissors.
|
|
|
|
|
|
|
|
INSULATION T/P 1/2X1-1/8INX3FT - Case of 14
|
|
These pipe insulation kits make for an easy energy saving project. Pipe insulation kits help to reduce heat loss to save energy cost.
|
|
|
|
|
|
|
|
PIPE INSULATION FOAM 1-3/8X6FT - Case of 32
|
|
Closed cell polyethylene foam. More thermally efficient. Cuts heat loss and stops pipe sweating. Helps stop freeze-ups. Contains flame retardants. Cut with scissors.
|
|
|
|
|
|
|
|
PIPE INSULATION FOAM 3-5/8X6FT - Case of 7
|
|
Self-sealing and adhesive lined. Sealed to resist freeze up, conserve heat and prevent sweating. Flame retarded 25/50 rated.
|
|
|
|
|
|
|
|
PIPE INSULATION FOAM 1-1/8X6FT - Case of 40
|
|
Closed cell polyethylene foam semi-slit pipe insulation is used in residential and light commercial plumbing projects to prevent heat loss and protect pipes from freezing. It is available in wall thicknesses of 3/8 to 1 in sizes ranging from 3/8 up to 4 in IPS ID. Tundra? is available to the trade in 6 ft lengths and also sold in limited sizes through retail stores across North America. Tundra? has a low thermal conductivity and very low water vapor transmission rate. This low density product demonstrates excellent thermal, physical and chemical-resistant properties and has a broad service temperature range between -297 and 200 deg F (-183 and 93 deg C). It can be installed in residential and light commercial plumbing projects. It is acceptable for use with heat tracing/heat tape.
|
|
|