|
|
|
|
|
|
|
|
|
|
|
|
|
|
Water Source Cable Guard, Suitable for: 4, 5, 6 in Well Casings
|
For all charging applications. For use with conventional tanks.
|
Water Source Flush Pipe Coupling, Nominal Size: 1-1/4 in, Slip Connection, Schedule Rating: SCH 40, PVC
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Water Source Flat Valve, Leather, Dimensions: 3-1/2 x 1-7/8 in
|
Water Source Inline Sump Check Valve, 1-1/2 in Nominal, MNPT Connection, PVC Body
|
For all charging applications. For use with conventional tanks.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The pitcher pump leathers are used in pitcher pumps. Prime the pump before each use. When wet, leathers will expand to create an air tight seal.
|
|
The 1-1/4 in well point drive coupling connects the well point to the drive pipe. The galvanized steel construction withstands the pounding force necessary to drive a well point into the ground. The design assures a tight joint at the pipe.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 1 in male adapter with the rope loop connects flexible poly pipe to the barbed end and a threaded iron pipe to the female end. To minimize leaks, make sure all connections are tight. Use thread tape on all threaded connections.
|
The 2 in well point drive coupling connects the well point to the drive pipe. The galvanized steel construction withstands the pounding force necessary to drive a well point into the ground. The design assures a tight joint at the pipe.
|
Designed for proper driving of well points. Has inside recess to prevent damage to pipe threads. Octagon-shaped for positive wrenching. Threads are standard pipe size, small vent hole in top of casting relieves pressure during driving operation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 10 in brass tank tee connects the water line from the pump to the pressure tank. 1/4 and 1/2 in ports accept a pressure switch, a pressure gauge, a relief valve and a snifter valve.
|
The stainless steel well point drives into all types of soil. They are engineered to provide an ideal combination of easy driving, effective sand control, corrosion resistance and strength. There is also a three step bonding design which prevents the screen from peeling back.
|
The 1 in pitless adapter can be used to connect submersible pump piping to a horizontal supply line. The 2 pieces of the pitless adapter separate so you can lift the pump easily. This pitless adapter has a brass body with Buna-N O-rings and gaskets.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 13 in brass tank tee connects the water line from the pump to the pressure tank. 1/4 and 1/2 in ports accept a pressure switch, a pressure gauge, a relief valve and/or a snifter valve.
|
Heavy-duty cast iron, 5 bolt construction, 1/4 in grounding lug, 9/16 in screened vent, non-toxic lead-free paint, 1 in NPT conduit connection. Casing ID 6 and 6-1/4 in.
|
For use with 3-wire 4 in submersibles. Significantly reduces power consumption. Saving electrical usage translates directly to cooler motor temperatures, resulting in longer motor life. Contains starting components in an easy-to install and service design. 230V. UL listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with 3-wire 4 in submersibles. Significantly reduces power consumption. Saving electrical usage translates directly to cooler motor temperatures, resulting in longer motor life. Contains starting components in an easy-to install and service design. Voltage rating of 230 V. UL listed.
|
Heavy-duty galvanized inner pipe. Cast iron point. Stainless steel gauze and screen. Pipe size 1-1/4 in Dia. Boxed.
|
Heavy-duty galvanized inner pipe. Cast iron point. Stainless steel gauze and screen. Pipe size of 1-1/4 in Dia. Boxed.
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty galvanized inner pipe. Cast iron point. Stainless steel gauze and screen. Pipe size 1-1/4 in Dia. Boxed.
|
|
|
