Home > FASTENERS > NUTS, BOLTS, SCREWS > CONSTRUCTION SCREWS - BULK
Choose a sub category:
SCREWS - BULK - DRYWALL -COARS SCREWS - BULK - DRYWALL -FINE SCREWS - BULK - DECK - COATED
SCREWS - BULK - DECK - GALV SCREWS - BULK- MULTI USE -COAT SCREWS - BULK- MULTI USE -YLW/
SCREWS - BULK- STRUCTURE -COAT
Sort By:
1
SCREW RSS INDV 5/16X3-1/8IN SCREW RSS INDV 3/8X8IN SCREW RSS INDV 3/8X12IN
GRK's RSS??? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS??? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS??? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS??? screw in pre-drilled hardware like hinges and connector plates. GRK's RSS? rugged structural screw is a structural fastener designed for ease of installation and the strongest of connections. RSS fasteners drive into most woods without the need for pre-drilling. The specially engineered design results in a low-effort installation, especially compared to conventional lag screws. GRK's RSS??? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS??? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS??? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS??? screw in pre-drilled hardware like hinges and connector plates.
SCREW R4 STAR PPK 9X2-3/4IN SCREW R4 STAR PPK NO10X4.314IN SCREW RSS INDV 3/8X10IN
GRK Fasteners R4 Screw, Thread Size: #9, 2-3/4 in L, Thread Type: CEE, Head Type: Round, Drive Type: Star, Point Type: Zip-Tip, Steel, Package Quantity: 480 PAIL, Multi-Purpose, Thread Length: 1.81 in, Drive Size: T25, SAE Grade, Gold, Applicable Materials: Cement Fiber Board, Melamine, Particle Board, Plastic, Sheet Metal, Wood, Length Under Head: 2.7 in, Shear Strength: 428 lb, 627 lb Tensile Strength, Includes: 2 in Bit GRK's R4??? self-countersinking screw has a patented underhead with saw-blade like cutting teeth and six self-contained cutting pockets. Together they act similar to a circular saw-blade, transporting the drill dust away from the edge of the screw hole while cutting a perfectly clean hole into even the most brittle materials without cracking any surface treatment. This design enhances the R4's versatility by allowing the fastener to countersink into even the hardest woods. The head of the screw closes the hole off with precision leaving no damaged fibers around the head. R4??? screws 2 in and longer have a four threaded CEE thread. This enlarges the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily. It increases the screw's drawing strength and reduces the friction on the screw shank that lowers the driving torque. GRK's RSS? rugged structural screw is a structural fastener designed for ease of installation and the strongest of connections. RSS fasteners drive into most woods without the need for pre-drilling. The specially engineered design results in a low-effort installation, especially compared to conventional lag screws.
SCRW WD S-TAP STAR-DR 5/16X4IN SCRW DCK COMBO 9X2-1/2 25LB SCRW DCK COMBO 9X3 25LB
GRK's RSS??? rugged structural screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS??? screws which are 3-1/8 in and longer have a six threaded CEE thread that enlarges the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increasing the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS??? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS??? screw in pre-drilled hardware like hinges and connector plates. Decking screws are used for decking and wood to wood construction. The PRO-FIT?? decking screws category includes ceramic coated deck screws with coarse threads for superior holding power when attaching to wood. Decking screws are used for decking and wood to wood construction. The PRO-FIT? decking screws category includes ceramic coated deck screws with coarse threads for superior holding power when attaching to wood.
SCREW RSS INDV 5/16X6IN SCREW 2-1/2 YZ 25# NO9 STAR 25 SCREW YZ 25# NO9 STAR INTERIOR
GRK's RSS??? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS??? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS??? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS??? screw in pre-drilled hardware like hinges and connector plates. ProFIT Screw, Thread Size: #9, 2-1/2 in L, Thread Type: Coarse, Head Type: Bugle, Drive Type: Star, Point Type: Sharp, Steel, Yellow Zinc, Multi-Purpose, Gold, Applicable Materials: Drywall ProFIT Multi-Purpose Screw, Thread Size: #9, 3 in L, Thread Type: Coarse, Head Type: Bugle, Drive Type: Star, Yellow Zinc, Package Quantity: 25 lb, Thread Length: 1-5/8 in, Drive Size: T25, Material Gauge: 8 ga, Gold, Suitable for: Exterior Deck and Railing Projects
SCREW RSS INDV 5/16X5-1/8IN STRUCTURAL SCREW T30 5/16X4IN SCREW STRUCTURAL 5/16X3-1/8IN
GRK's RSS? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS? screw in pre-drilled hardware like hinges and connector plates. GRK's RSS??? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS??? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS??? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS??? screw in pre-drilled hardware like hinges and connector plates. GRK's RSS? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS? screw in pre-drilled hardware like hinges and connector plates.
SCREW RSS 5/16X3-1/2IN SCREW FRAMING/DECK 10X4-3/4IN SCREW M/P FRAME/DECK 10X4IN
GRK's RSS??? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS??? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS??? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS??? screw in pre-drilled hardware like hinges and connector plates. GRK Fasteners R4 Framing and Decking Screw, Thread Size: #10, 4-3/4 in L, Head Type: Round, Drive Type: Star, Steel, Multi-Purpose, Thread Length: 3 in, Drive Size: T25, Applicable Materials: Cement Fiber Board, Melamine, Particle Board, Plastic, Sheet Metal, Wood GRK Fasteners R4 Framing and Decking Screw, Thread Size: #10, 4 in L, Head Type: Round, Drive Type: Star, Steel, Package Quantity: 1000 BX, Multi-Purpose, Thread Length: 2.99 in, Drive Size: T25, Applicable Materials: Cement Fiber Board, Melamine, Particle Board, Plastic, Sheet Metal, Wood
SCREW RSS 10X3-1/8IN SCREW M/P FRAME/DCK 10X3-1/2IN SCREW M/P FRAME/DCK 10X3-1/8IN
GRK's RSS??? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS??? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS??? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS??? screw in pre-drilled hardware like hinges and connector plates. GRK Fasteners R4 Framing and Decking Screw, Thread Size: #10, 3-1/2 in L, Head Type: Round, Drive Type: Star, Steel, Package Quantity: 1200 BX, Multi-Purpose, Thread Length: 2.36 in, Drive Size: T25, Applicable Materials: Cement Fiber Board, Melamine, Particle Board, Plastic, Sheet Metal, Wood GRK Fasteners R4 Framing and Decking Screw, Thread Size: #10, 3-1/8 in L, Head Type: Round, Drive Type: Star, Steel, Package Quantity: 1500 BX, Multi-Purpose, Thread Length: 2.087 in, Drive Size: T-25, Applicable Materials: Cement, Fiber Board, Melamine, Particle Board, Plastic, Sheet Metal, Wood
SCREW M/P FRAME/DECK 9X3-1/8IN STRUCTURAL SCREW T30 5/16X6IN SCREW FRAMING/DECK 9X2IN
GRK Fasteners R4 Framing and Decking Screw, Thread Size: #9, 3-1/8 in L, Head Type: Round, Drive Type: Star, Steel, Package Quantity: 1900 BX, Multi-Purpose, Thread Length: 2.087 in, Drive Size: T-25, Applicable Materials: Cement, Fiber Board, Melamine, Particle Board, Plastic, Sheet Metal, Wood GRK's RSS??? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS??? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS??? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS??? screw in pre-drilled hardware like hinges and connector plates. GRK Fasteners R4 Framing and Decking Screw, Thread Size: #9, 2 in L, Drive Type: Star, Steel, Package Quantity: 3700 BX, Multi-Purpose, Thread Length: 1.29 in, Drive Size: T25, Applicable Materials: Cement Fiber Board, Melamine, Particle Board, Plastic, Sheet Metal, Wood
SCREW MULTI-PURPOSE 9X2-1/2IN SCREW FRAMING 12/14X5-5/8IN
GRK Fasteners R4 Framing and Decking Screw, Thread Size: #9, 2-1/2 in L, Head Type: Round, Drive Type: Star, Steel, Package Quantity: 2900 BX, Multi-Purpose, Thread Length: 1.575 in, Drive Size: T-25, Applicable Materials: Cement, Fiber Board, Melamine, Particle Board, Plastic, Sheet Metal, Wood GRK Fasteners R4 Framing and Decking Screw, Thread Size: #12, 5-5/8 in L, Head Type: Round, Drive Type: Star, Steel, Package Quantity: 600 BX, Multi-Purpose, Thread Length: 3 in, Drive Size: T-25, Applicable Materials: Cement, Fiber Board, Melamine, Particle Board, Plastic, Sheet Metal, Wood
   
 
1